09/01/2024

Share

Within these facilities, preventive maintenance equipment is imperative to efficient operation. We are sharing a story from one of our customers that utilized Goodway's ScaleBreak to perform a chemical tube cleaning in a waste-to-energy plant on the East Coast.

In this plant, a loss of efficiency in the dump condenser was detected, initiating a cleaning work order for a scheduled shutdown. The dump condenser is one of the many pieces of equipment found in these facilities where preventative maintenance is imperative to efficient operation. These condensers recover excess heat generated by steam before it is uselessly put into the atmosphere. 

During fluctuating steam loads, turbine start-up, turbine trip off, or bypass, the excess steam that would ordinarily be vented can be diverted to a dump condenser for recovery as they act as a standby and/or emergency heat sink for the mainstream
flow to the Turbine. However, when steam formed deposits accumulate on condenser tube surfaces, it creates an insulating barrier, which minimizes efficient heat transfer of the condenser. 
{{editor}}

The solution used was Goodway Technologies ScaleBreak-MP (Multi-Purpose), a citric based biodegradable descaling solution which dissolves 2.5 pounds of scale per gallon. Since the condenser tubes were stainless steel, the cleaning required a compatible descaling solution to ensure the stainless steel would not be damaged.

The condenser had a total volume of 3,854 gallons including waterboxes and piping. The scale thickness ranged between 1/16' of scale throughout the tubesheet. The decision was made to utilize 660 gallons of ScaleBreak-MP (a 17% mixture) and circulated for 8 hours.

The results were perfect as shown in the tube pictures, ScaleBreak-MP completely removed all the scale accumulations. Contact the experts at Goodway Technologies to ask how we can help your facility restore efficient equipment operation and reduce energy consumption.

By Goodway Technologies

Source : All Pet Food
 


Share

Rate the reading


Videos


Events

Upcoming
IPPE 2025

IPPE 2025

January 28 to 30, 2025

Atlanta, Georgia USA

Upcoming
IBERZOO + PROPET 2025

IBERZOO + PROPET 2025

February 26 to 28, 2025

Madrid, España.

Upcoming
FIGAN 2025

FIGAN 2025

March 25 to 28, 2025

Feria de Zaragoza

Upcoming
Global Pet Expo 2025

Global Pet Expo 2025

March 26 to 28, 2025

Orlando, Florida

Upcoming
World Plastic Connection Summit 2025

World Plastic Connection Summit 2025

April 08 to 10, 2025

Sao Paulo - Brazil

Upcoming
ZOOMARK 2025

ZOOMARK 2025

May 05 to 07, 2025

BolognaFiere, Italy

Advertising

Small Lateral